TILE AND CERAMIC HIGH STRENGTH ADHESIVE
A grey cement-based top quality tile adhesive for fixing ceramic tiles and mosaics. It is supplied in powder form for mixing with clean water on site. White tile adhesive is available for porcelain tiles. To provide an easy to use bedding for wall and floor tiles with controlled setting time, good water retention and excellent adhesion.
- Extended Open Time up to 30min at 20°C
- Pot life up to 2h30min at 20°C
- Initial setting time is up to 360min
- Final setting time starting 420min
- Excellent adhesion to the substrate
For fixing ceramic tiles or mosaics to floor and wall surfaces.
|Initial Tensile Adhesion Strength||1.92 N/mm2|
|Tensile Adhesion strength after water immersion||1.43 N/mm2|
|Tensile Adhesion strength after heat ageing||1.37 N/mm2|
|Tensile Adhesion strength after freeze-thaw cycles||1.57N/mm2|
|Open Time: tensile adhesion strength (after mot less than 20 min)||1.26N/mm2|
Please keep it in a cool dry place between 5℃-35℃, avoid direct sunlight.
Shelf life: 12 months
Health & Safety Precautions
Use rubber hand gloves & safety goggles, while using REPOD C100
In case of contact with skin, wash with plenty of water.
Keep out of reach of children’s.
Use MSDS to further safety information.