KLATEX TL
Placeholder

KLATEX

TILE, CERAMIC ADHESIVE

 

 

 

Product Introduction

A grey cement-based top quality tile adhesive for fixing ceramic tiles and mosaics. It is supplied in powder form for mixing with clean water on site. White tile adhesive is available for porcelain tiles. To provide an easy to use bedding for wall and floor tiles with controlled setting time, good water retention and excellent adhesion.

 

 

 

Advantages

  • Extended Open Time up to 30min at 20°C
  • Pot life up to 2h30min at 20°C
  • Initial setting time is up to 360min
  • Final setting time starting 420min
  • Excellent adhesion to the substrate

 

Application

For fixing ceramic tiles or mosaics to floor and wall surfaces.

 

 

 

Product Data

 

APPEARNCE GREY POWDER
DENSITY 1.9 gr/cm3
USAGE 5-6 kg/m2
Initial Tensile Adhesion Strength 1.42 N/mm2
Tensile Adhesion strength after water immersion 1.03  N/mm2
Tensile Adhesion strength after heat ageing 0.98 N/mm2
Tensile Adhesion strength after freeze-thaw cycles 1.12 N/mm2
Open Time: tensile adhesion strength (after mot less than 20 min) 1.05N/mm2

 

 

 

 

 

 

 

 

Packing

25kg packs

 

Storage

Please keep it in a cool dry place between 5℃-35℃, avoid direct sunlight.

Shelf life: 12 months

 

Health & Safety Precautions

Use rubber hand gloves & safety goggles, while using REPOD C100

In case of contact with skin, wash with plenty of water.

Keep out of reach of children’s.

 

 

Notes

Use MSDS to further safety information.